pradeepmash07@yahoo.com.au [COMSOL_Users]
2014-10-08 07:14:25 UTC
Hi, I am a new COMSOL user and I am trying to figure out if COMSOL will be suitable for my research work before I purchase a license. I need some help in modifying the geometry sequence that come with the Mixer module. I was trying to include an inlet point at the top of the beaker. I tried doing it but could not succeed. Here is a brief introduction of the research work I am trying to carry out:
Take a beaker and add a given amount of a buffer solution in it. Keep the solution completely mixed by stirring it continuously. Now add a drop (or a pulse) of a reagent from top of the beaker near the boundary/circumference of the beaker and simulate the mixing. So I need to add an inlet near the top edge of the beaker. There will be no outlet as nothing is going out of the system.
Please explain me how do I do this by modifying the existing dished bottom vessel geometry sequence.
Thank you.
Pradeep
Take a beaker and add a given amount of a buffer solution in it. Keep the solution completely mixed by stirring it continuously. Now add a drop (or a pulse) of a reagent from top of the beaker near the boundary/circumference of the beaker and simulate the mixing. So I need to add an inlet near the top edge of the beaker. There will be no outlet as nothing is going out of the system.
Please explain me how do I do this by modifying the existing dished bottom vessel geometry sequence.
Thank you.
Pradeep