[COMSOL_Users] Intergrate a SPICE netlist to a Comsol modell

[so3ody_2010]

Hello memebers :)


I have a LTSPICE Modell which I would like to integrate to a Comsoll Modell.

As an exmaple i read and applied the "I n d u c t o r i n a n A m p l i f i e r C i r c u i t" example under AC DC --> inductive devices and coils and then inductor in circuit... it worked and I could import a .cir List to my modell and simulate it ..

I tryed the same with my Spice and Comsoll Modell but I dosent work ... can any one please tell me why it dosent work or what shall I do ??

I work with COMSOL 4.3 and LTSPICE

this is my .cir list

v1 4 0 sine(0 327m 44meg) ac 327m
ri 5 4 50
t2 5 0 6 0 td=3.05e-009 z0=50
r5 7 6 16.6666666666667
r3 7 8 16.6666666666667
r4 3 7 16.6666666666667
t1 3 0 tl 0 td=3.05e-009 z0=50
r2 tl 0 100
g:u1:1 0 1 tl 1 13000000
rsh 1 0 68
cc 2 1 330n
r1 2 0 225
c1 2 0 1p
l1 9 8 176n
c2 10 9 70p
c3 11 0 70p
r:u1:3 n001 0 1.
c:u1:3 n001 0 0.00646566956310825
tline 10 11 11 11 td=9.59484978598424e-009 z0=50
.ac lin 10001 10meg 100meg
.SUBCKT tline COMSOL:*
.ENDS
.end


My Comsoll Modell is component tline and the Subcircuit ".SUBCKT tline COMSOL:*" belongs also to the Comsoll Modell


Thanks and best regards from Germany !