s_sivab
2013-03-12 05:34:37 UTC
Dear COMSOL_Users,
For the hollow core photonic crystal fiber design in comsol, how to increase the doping level of the gases through refractive index value.Then how the refractive index values varies with respect to doping percentage levels.
i.e., argon refractive index value is 1.00028
to estimate some average properties for a change of the analyte refractive index by 0.1 percent from 1.00028 to 1.10028 calculated for different core doping levels for getting the fundamental mode.
Many thanks, if there is reply.
With regards,
Aruna
For the hollow core photonic crystal fiber design in comsol, how to increase the doping level of the gases through refractive index value.Then how the refractive index values varies with respect to doping percentage levels.
i.e., argon refractive index value is 1.00028
to estimate some average properties for a change of the analyte refractive index by 0.1 percent from 1.00028 to 1.10028 calculated for different core doping levels for getting the fundamental mode.
Many thanks, if there is reply.
With regards,
Aruna