[COMSOL_Users] Parametric study with two parameters

[Matteo Cacciola]

Hello
I am facing a problem with my Comsol 4.3. I am carrying out a thermal
stress simulation with a parametric study. But I need to set two parameters
for the study.

After doing it within the study extension, setting the values of the two
parameters and selecting "All combinations", I run the simulation. But, I
obtain results related to only one of the parameters. Practically, only one
parameter changes, the other doesn't.

Any suggestions?

Best regards
Matteo

[Alex Gourevitch]

Hi Matteo:

In the last parametric sweep (under Probes window) make active:

Accumulated probe table
Use all probes

Simulation results should output into an accumulated probe table

Alex.




________________________________
From: Matteo Cacciola <***@gmail.com>
To: ***@yahoogroups.com
Sent: Saturday, August 3, 2013 12:41 AM
Subject: [COMSOL_Users] Parametric study with two parameters



 
Hello
I am facing a problem with my Comsol 4.3. I am carrying out a thermal stress simulation with a parametric study. But I need to set two parameters for the study.
After doing it within the study extension, setting the values of the two parameters and selecting "All combinations", I run the simulation. But, I obtain results related to only one of the parameters. Practically, only one parameter changes, the other doesn't.
Any suggestions?
Best regards
Matteo

[Matteo Cacciola]

Dear Alex
thanks for your reply.
Could you drive me through the setting of your suggestion, please?

Thanks and best regards
Matteo

Post by Alex Gourevitch
**
Accumulated probe table
Use all probes
Simulation results should output into an accumulated probe table
Alex.
------------------------------
*Sent:* Saturday, August 3, 2013 12:41 AM
*Subject:* [COMSOL_Users] Parametric study with two parameters
Hello
I am facing a problem with my Comsol 4.3. I am carrying out a thermal
stress simulation with a parametric study. But I need to set two parameters
for the study.
After doing it within the study extension, setting the values of the two
parameters and selecting "All combinations", I run the simulation. But, I
obtain results related to only one of the parameters. Practically, only one
parameter changes, the other doesn't.
Any suggestions?
Best regards
Matteo

[Firat]

Hi Matteo,

one study extension and one parametric sweep .. you can combine both of them then it works..

you add one parameter as parametric sweep and the other one as strudy extension..

Best regards..

________________________________
From: Matteo Cacciola <***@gmail.com>
To: ***@yahoogroups.com
Sent: Saturday, August 3, 2013 9:41 AM
Subject: [COMSOL_Users] Parametric study with two parameters



 
Hello
I am facing a problem with my Comsol 4.3. I am carrying out a thermal stress simulation with a parametric study. But I need to set two parameters for the study.
After doing it within the study extension, setting the values of the two parameters and selecting "All combinations", I run the simulation. But, I obtain results related to only one of the parameters. Practically, only one parameter changes, the other doesn't.
Any suggestions?
Best regards
Matteo

[atieh]

Hi everyone,

I'm beginner to COMSOL and I'm modeling hyperthermia cancer treatment with magnetic nano particles. I'm using bioheat transfer for the body cells, mixture model for modeling nano particle mixture in the body, and electromagnetic waves to generate magnetic field in the nano particles.

when I press compute, the error "empty parameter list in stationary solution appears.

I don't know how to solve this problem and how to be sure that the modules are perfectly coupled.

help me please.